2. What is the peak voltage of a sine wave that measures 220
VAC rms?
3. A 1-mW signal is attenuated at the rate of 5 dB/1,000ft.
What is the power level into a receiver that is 6,000 feet from the signal
source?
4 . A power amplifier has a gain of 20 dB and an input
level of 2 volts. Assuming that the input and output impedances are the same, what is
the voltage level at the amplifier output?
5. A precision current shunt is measuring 100 millivolts
across it. This indicates a current of 25 A. What is the actual resistance of this
shunt?
6. A power system is providing 200 VAC at 25 A. The phase
angle between current and voltage is 25°. What is
the true power used by the system?
nice!
ReplyDelete